Collection: Adoptable Sewer Pipe & Fittings

Adoptable sewer pipe is for drains that a water company will take over once a development is finished. Choose by diameter and system: Funke HS solid wall pipe from 110mm to 315mm, or Naylor Metro structured wall pipe from 150mm to 300mm. Check the sewerage company's requirements for your site before ordering.

Read the buying guide and questions
  • Funke HS gravity pipe in 110mm, 160mm, 250mm and 315mm, 3m lengths, rated SN12
  • Funke HS bends at 15, 30, 45 and 87 degrees, Y and T junctions, level invert reducers, socket plugs and couplers with a central stop
  • Naylor Metro twin wall polypropylene pipe rated SN8, made to BS EN 13476-3 and WIS 4-35-01
  • Naylor Metro bends, 45 degree junctions, couplings, end caps and sealing rings
  • For foul and surface water sewers on housing and commercial developments

Questions about adoptable sewer pipe & fittings

What makes a sewer pipe adoptable?

An adoptable pipe meets the water company's specification for sewers it will take over and maintain. In England this is set by the Water UK Design and Construction Guidance, which replaced Sewers for Adoption 7th edition. The sewerage company approves the design before work starts.

What does SN8 or SN12 mean?

SN is the pipe's ring stiffness in kilonewtons per square metre. A higher number means a stiffer pipe that resists being squashed by soil and traffic loads. SN8 is a common minimum for adoptable plastic sewers. Working from a section 104 drawing? Send it for a free drawing take-off.