Collection: 110mm Sewer Pipe & Fittings

110mm sewer pipe is the standard size for underground drains from a single house: toilets, sinks, showers and rainwater. Choose 3m or 6m socketed lengths, then the bends, junctions and access fittings to suit your run.

Read the buying guide and questions
  • 110mm socketed pipe in 3m and 6m lengths, plus 6m perforated pipe
  • Short radius bends at 15, 30, 45 and 90 degrees, single and double socket, and a 90 degree rest bend
  • Equal T junctions at 87.5 degrees and Y junctions at 45 degrees, double and triple socket
  • Couplers, slip couplers, socket plugs and screwed access caps
  • Plastic and sealed aluminium rodding eyes, round bottle gullies, P-traps and a square hopper head
  • Buffalo non-return valve with a rat barrier

Questions about 110mm sewer pipe & fittings

What fall does a 110mm drain need?

A fall of 1 in 40 is the usual figure for a 110mm house drain. Approved Document H allows 1 in 80 where the drain carries more than 1 litre per second and serves at least one WC.

When should I use a slip coupler?

Use a slip coupler to repair a damaged length or drop a fitting into an existing run. It has no centre stop, so it slides fully over one pipe end and back across the joint.