Collection: 160mm Sewer Pipe & Fittings

160mm sewer pipe is used for shared underground drains where several houses join one run, and for long runs that need a flatter fall than 110mm allows. Choose 3m or 6m socketed lengths, then the bends, junctions and reducers to connect 110mm branches.

Read the buying guide and questions
  • 160mm solid socketed pipe in 3m and 6m lengths, made to BS EN 1401
  • Bends at 15, 30, 45 and 90 degrees, single and double socket
  • Equal T and Y junctions, and 160 x 110mm unequal T and Y junctions for house connections
  • 160mm to 110mm level invert reducer
  • Couplers, slip couplers and a sealed aluminium rodding eye

Questions about 160mm sewer pipe & fittings

When do I need 160mm instead of 110mm?

Use 160mm when a drain serves several properties, or on a long run where the fall is too shallow for 110mm. Approved Document H allows a 150mm drain serving at least five WCs to run at 1 in 150.

How do I connect a 110mm branch to a 160mm drain?

Use a 160 x 110mm unequal Y or T junction for a branch, or the 160mm to 110mm level invert reducer to change size in line. The reducer keeps the bottom of the pipe level so flow is not held back.