Installation of a Pumping Station to Direct Sewage to the Nearest Mains

Installation of a Pumping Station to Direct Sewage to the Nearest Mains

We’ve been installing sewage treatment solutions for almost 30 years and have built up a reputation for the quality of our service. Here’s an example of a pumping station we installed to direct sewage to the mains at a brand-new property.

The property

A brand-new house was built near Grendon, a village in rural Warwickshire. The land had not been used for a dwelling before and was not connected to the mains sewer. The owner therefore needed a solution to enable him to pump sewage and wastewater to the closest mains.

The result

Roger Albrington, the owner of the property, commented: “We needed a pumping solution to direct sewage to the closest Severn Trent mains. The difficulty was the location of my property, as it was situated 6 metres below the mains and 200 metres across from it. To make this job even more difficult, my property was on an unadopted lane with seven other dwellings, so there was no visible plan of where gas, water, and electricity points were.

I was recommended Cotterills for the job and they did not disappoint. As an ex-builder myself, I knew I needed professionals with the right skills for this sort of work. I wanted a solution that would last and not cause future headaches.

I was really impressed by Cotterills’ disciplined approach and the quality of their work. Even without visibility of a plan showing where all the buried services were, they managed to avoid damaging these using careful scanning, excavation machinery, and hand digging. They did an excellent job for us.”

Alternatively, fill out our enquiry form:


Back to Top