160mm x 110mm Unequal Junction 90 degree T
£13.95 (£16.74 incl VAT)
Warning: sizeof(): Parameter must be an array or an object that implements Countable in /srv/users/cotterillcivils/apps/cotterillcivils/public/wp-content/themes/porto-child/woocommerce/single-product/meta.php on line 25
- Additional information
- Reviews (0)
110 mm, 160 mm
110mm Screwed Access Cap0 out of 5
For use at the end of a pipe run or at a branch to create an access point.
- 110mm PVCu
- Ring Seal Joints
- Suitable for Gravity Drainage & Sewerage
- Install to Depths of 10m
160mm D/S Bend 45 degree0 out of 5
160mm PVC underground 45 degree drainage bend. Double socket with integral rubber seals allows insertion of plain ended pipe or fitting. Manufactured to EN-1401.
110mm Slip Coupler0 out of 5
SN8 double socket slip coupler for repairing existing 110mm sewer/drainage pipe without centre stop.
Outside Diameter: 110mm
110mm D/S Short Radius Bend 30 degree0 out of 5
All underground drain systems feature a combined lip and compression seal which is secure against dislodgement and makes jointing easier.
All systems are manufactured in the UK to stringent quality standards providing the installer with a completely reliable product range that will continue to perform.
110mm Oval Rodding Eye – Plastic0 out of 5
Product Depth 145 mm
Product Diameter 110 mm
Product Height 185 mm
Product Type Rodding Point (Spigot)
Product Width 127 mm
110mm S/S Short Radius Bend 30 degree0 out of 5
30° SN8 single socket short radius bend for connecting 110mm sewer drainage pipe.
Internal Diameter: 30°
160mm D/S Bend 15 degree0 out of 5
160mm PVC underground 15 degree drainage bend. Double socket with integral rubber seals allows insertion of plain ended pipe or fitting. Manufactured to EN-1401.
160mm S/S Bend 45 degree0 out of 5
160mm ring seal single socket drain bend 45 degree.
Manufactured to EN1401
110mm S/S Short Radius Bend 45 degree0 out of 5
45° SN8 single socket short radius bend for connecting 110mm sewer drainage pipe.
Internal Diameter: 45°
110mm Round Back Inlet Bottle Gully0 out of 5
PVC underground round top back inlet bottle gully with 110mm spigot outlet. Complete with integral trap that can be easily removed for rodding. Back inlet is pre-drilled ready to accept 110mm drain pipe, silicone or adhesive will be required. Overall dimensions: 190mm diameter x 290mm high. Rising piece can be bought separately if you need if you need a greater depth than 290mm. Light duty, only suitable for pedestrian traffic.