Klargester Bypass Separator 55,556 sqm

£5,450.50 (£6,540.60 incl VAT)

Spec:

Flow (l/s) : 100

Peak Flow Rate (l/s) : 1000

Drainage area (m 2) : 55556

Storage Capacity (Ltrs) – Oil : 1500

Storage Capacity (Ltrs) – Silt : 10000

Length (mm) : 7661

Diameter (mm) : 1920

Access Shaft Diameter (mm) : 600

Base Inlet Invert (mm) : 2235

Base to Outlet Invert (mm) : 2035

Standard Fall Across (mm) : 200

Min Inlet Invert (mm) : 950

Standard Pipework Diameter (mm) : 750

TECHNICAL INFORMATION

Bypass separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the separator. These separators are used when it is considered an acceptable risk not to provide full treatment for high flows, for example where the risk of a large spillage and heavy rainfall occurring at the same time is small.

Estimated delivery: 5-7 days


or request a call back
SKU: PC-IBS/55556 Categories: ,
  • Description
  • Additional Information
  • Reviews (0)

Product Description

Klargester bypass separators provide the ideal solution for low risk floods – when there is little possibility of a combined heavy rainfall and large spillage.

Bypass separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events.  Flows above this rate are allowed to bypass the separator.

Features and benefits

  • Light and easy to install, saving you time and money
  • Class I design
  • GRP or rotomoulded construction (subject to model)
  • Oil alarm system available (required by EN858-1 and PPG3)
  • Inclusive of silt storage volume
  • Fitted inlet/outlet connectors
  • Vent points within necks
  • Extension access shafts for deep inverts
  • Maintenance from ground level
  • CE-marked

 

 

Additional Information

Brand

Klargester

Fuel & Oil Seperators

20,001 + sqm

Reviews

There are no reviews yet.


Be the first to review “Klargester Bypass Separator 55,556 sqm”