Klargester Bypass Separator 16,670 sqm

Klargester Bypass Separator 16,670 sqm

£2,436.50 (£2,923.80 incl VAT)

Spec:

Flow L/S : 30

Peak Flow Rate: 300

Drainage Area m2 : 16,670

Storage Capacity Silt : 3000L

Storage Capacity Oil : 450L

Unit Length : 4265mm

Unit Diameter : 1420mm

Access Shaft Diameter: 750mm

Base to Inlet Invert : 1680mm

Base to Outlet Invert : 1580mm

Standard Fall Across: 100mm

Minimum Inlet Invert: 700mm

Pipework Diameter : 450mm

TECHNICAL INFORMATION

Bypass separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the separator. These separators are used when it is considered an acceptable risk not to provide full treatment for high flows, for example where the risk of a large spillage and heavy rainfall occurring at the same time is small.

Estimated delivery: 5-7 days


or request a call back
SKU: PC-IBS/16670 Categories: ,
  • Description
  • Additional Information

Product Description

Klargester bypass separators provide the ideal solution for low risk floods – when there is little possibility of a combined heavy rainfall and large spillage.

Bypass separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events.  Flows above this rate are allowed to bypass the separator.

Features and benefits

  • Light and easy to install, saving you time and money
  • Class I design
  • GRP or rotomoulded construction (subject to model)
  • Oil alarm system available (required by EN858-1 and PPG3)
  • Inclusive of silt storage volume
  • Fitted inlet/outlet connectors
  • Vent points within necks
  • Extension access shafts for deep inverts
  • Maintenance from ground level
  • CE-marked

 

Additional Information

Brand

Klargester

Fuel & Oil Seperators

15,001 – 20,000 sqm