- Additional Information
- Reviews (0)
160mm to 110mm Level Invert Reducer0 out of 5
160mm (6 Inch) x 110mm (4 Inch) PVC Drainage Reducers are manufactured in the UK to BS EN 1401
110mm D/S Short Radius Bend 45 degree0 out of 5
All underground drain systems feature a combined lip and compression seal which is secure against dislodgement and makes jointing easier.
All systems are manufactured in the UK to stringent quality standards providing the installer with a completely reliable product range that will continue to perform.
160mm D/S Junction 90 degree T0 out of 5
160mm ring seal double socket drainage junction 90 degree. This product is also referred to as a T or square junction.
Manufactured to EN1401
160mm S/S Bend 30 degree0 out of 5
160mm ring seal single socket drain bend 30 degree.
Manufactured to EN1401
160mm Slip Coupler0 out of 5
160mm (6 Inch) PVC Drainage Slip Couplers, also known as Repair Couplers, are used to connect two plain ended pipes and have no central stop making repairing pipe simple.
160mm D/S Bend 45 degree0 out of 5
160mm PVC underground 45 degree drainage bend. Double socket with integral rubber seals allows insertion of plain ended pipe or fitting. Manufactured to EN-1401.
Pipe Lubricant0 out of 5
Pipe Lubricant is for plastic pipes: a white, water miscible paste based on synthetic materials. Standard application: general plumbing and construction.
110mm T/S Equal Junction 87.5 degree T0 out of 5
Triple socket allows connection of two underground drainage systems into one. Strong, durable PVCu. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals will facilitate jointing.
- Suitable for High-Temperature Waste Discharges
- 110mm PVCu
- Ring Seal Joints
- Suitable for Gravity Drainage & Sewerage
- Install to Depths of 10m
160mm D/S Bend 15 degree0 out of 5
160mm PVC underground 15 degree drainage bend. Double socket with integral rubber seals allows insertion of plain ended pipe or fitting. Manufactured to EN-1401.
110mm Oval Rodding Eye – Plastic0 out of 5
Product Depth 145 mm
Product Diameter 110 mm
Product Height 185 mm
Product Type Rodding Point (Spigot)
Product Width 127 mm