Sewer Fittings

  • 110mm Socket Plug

    0 out of 5

    Suitable for gravity drainage and sewerage installations at depths of up to 10m. Designed to plug any unused sockets. BS 4660 BS EN 1401-1 1998. Strong, durable uPVC. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals facilitates jointing.

    • Suitable for High Temperature Waste Discharges
    • 110mm uPVC
    • Ring Seal Joints
    • Suitable for Gravity Drainage & Sewerage
    • Install to Depths of 10m
    • Suitable for Gravity Drainage & Sewerage
    (£0.00 incl VAT)
  • 110mm Coupler

    0 out of 5

    Couplings, or connectors as they are sometimes referred to, are used to join two pipes together. If the pipe has been cut to length it should be chamfered and lubricated prior to insertion into the connector to ensure the best possible seal.

     This connector has a centre stop, which means that it cannot be slid along a pipe – it is used predominantly when laying new drains. If you are repairing or replacing a section of broken pipe, it is easier to use a slip coupling which does not have the centre stop. This enables the slip coupling to be inserted completely onto one of the lengths of pipe and then moved back into position to make the join when the new section of pipe is lowered into position.
    £1.38 (£1.66 incl VAT)
  • 110mm Slip Coupler

    0 out of 5

    SN8 double socket slip coupler for repairing existing 110mm sewer/drainage pipe without centre stop.

    Outside Diameter: 110mm
    Standards: EN1401-1
    Material: PVC-U

    £1.38 (£1.66 incl VAT)
  • 110mm S/S Short Radius Bend 15 degree

    0 out of 5

    15° SN8 single socket short radius bend for connecting 110mm sewer drainage pipe.

    Internal Diameter: 15°
    Standards: EN1401-1
    Material: PVC-U

    £1.96 (£2.35 incl VAT)
  • 110mm S/S Short Radius Bend 30 degree

    0 out of 5

    30° SN8 single socket short radius bend for connecting 110mm sewer drainage pipe.

    Internal Diameter: 30°
    Standards: EN1401-1
    Material: PVC-U

    £1.96 (£2.35 incl VAT)
  • 110mm S/S Short Radius Bend 45 degree

    0 out of 5

    45° SN8 single socket short radius bend for connecting 110mm sewer drainage pipe.

    Internal Diameter: 45°
    Standards: EN1401-1
    Material: PVC-U

    £1.96 (£2.35 incl VAT)
  • 110mm D/S Short Radius Bend 15 degree

    0 out of 5

    All underground drain systems feature a combined lip and compression seal which is secure against dislodgement and makes jointing easier.

    All systems are manufactured in the UK to stringent quality standards providing the installer with a completely reliable product range that will continue to perform.

    £2.12 (£2.54 incl VAT)
  • 110mm D/S Short Radius Bend 30 degree

    0 out of 5

    All underground drain systems feature a combined lip and compression seal which is secure against dislodgement and makes jointing easier.

    All systems are manufactured in the UK to stringent quality standards providing the installer with a completely reliable product range that will continue to perform.

    £2.12 (£2.54 incl VAT)
  • 110mm D/S Short Radius Bend 45 degree

    0 out of 5

    All underground drain systems feature a combined lip and compression seal which is secure against dislodgement and makes jointing easier.

    All systems are manufactured in the UK to stringent quality standards providing the installer with a completely reliable product range that will continue to perform.

    £2.12 (£2.54 incl VAT)
  • 110mm D/S Equal Junction 45 degree Y

    0 out of 5

    Double socket allows connection of two underground drainage systems into one. Strong, durable PVC-U. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals will facilitate jointing.

    £3.45 (£4.14 incl VAT)
  • 110mm D/S Equal Junction 87.5 degree T

    0 out of 5

    Size : 110mm
    Material: PVCu
    Spec: BS EN 1401-1

    £3.45 (£4.14 incl VAT)
  • Bottle Gully Square Top Adaptor 110mm

    0 out of 5
    £3.50 (£4.20 incl VAT)