110mm Sewer Pipe & Fittings

We supply a large range of sewer pipes and sewer pipe fittings to meet any requirement whether that’s at home or in a commercial setting.

Cost-effective and easy to install, these pipes are essential to the set up of your drainage system. uPVC pipes are long lasting and not easily susceptible to damage. Our pipes are approved by a number of water companies, incl. Severn Trent and Anglian Water.

Contact our team of specialists for expert advice on 0121 351 3230.

At Cotterill Civils, we supply a large range of sewer pipes in a variety of fittings up to 160mm. We also provide sewer pipe fittings, including junctions, screwed access caps, level invert reducers and many more. These are essential when fitting sewer pipes and can be as adaptable as required for your desired use. PVC pipe is the most widely used sewer pipe – this plastic sewer pipe is now the mostly widely used sewer pipe, in many homes and also can be used in a commercial setting.

Why choose uPVC over clay?

Many contractors are choosing to use HS pipe over clay pipe due to its cost saving benefits and ease of installation. uPVC pipes are long lasting with less need for replacement and repair, whilst clay pipes are more costly when damaged, whilst also being more likely to be damaged through clogging and cracking. uPVC sewer pipes are accepted by a number of water companies, including Anglian water, Severn Trent and many more. The lightweight nature of uPVC pipes means there is less risk of personal injury during installation compared to clay pipe.

We also provide inspection chambers which are compatible with our plastic sewer pipe.

The Benefits

The benefits of plastic sewer pipe:

• Plastic sewer pipe is one of the strongest and most durable types of sewer drain pipe.
• It offers a safe, leak proof way to drain water away from properties, and commercial land.
• It is cost effective.
• Sewer drain pipe is lightweight, so lower risk of personal injury in shipping and installation.
• The pipe is more flexible and less prone to cracking.
• All fittings are clearly marked.
• These pipes are resistant to root intrusion and damage.
• They are fast and easy to install.
• The pipes are long lasting, which means less need for repair and replacement.
• The sewer drain pipe is available in a range of sizes, available to fit your needs.
• Accepted by a number of water companies including Anglian Water, Northumbrian Water Ltd, Severn Trent, Southern Water and Wessex Water.

Here at Cotterill Civils, we are one of the UK’s leading providers of the highest quality uPVC plastic, sewer drain pipe from the best brands around.

For a free quote, or to see what pipes and fittings are best suited to the requirements of your property or site and your budget, please get in touch with us today on 0121 351 3230.

Our friendly and highly experienced team are on hand 8am-5pm Monday to Friday, so don’t hesitate to call us for a chat.

  • 110mm x 3mtr Socketed Sewer Pipe

    4.50 out of 5

    Call for best price

  • 110mm x 6mtr Socketed Sewer Pipe

    0 out of 5

    Call for best price

  • Pack Socketed Sewer Pipe (77no) – 110mm x 6 mtr

    0 out of 5

    Call for best price

  • Pack Socketed Sewer Pipe (86no) – 110mm x 3 mtr

    0 out of 5

    Call for best price

  • 110mm Socket Plug

    0 out of 5

    Suitable for gravity drainage and sewerage installations at depths of up to 10m. Designed to plug any unused sockets. BS 4660 BS EN 1401-1 1998. Strong, durable uPVC. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals facilitates jointing.

    • Suitable for High Temperature Waste Discharges
    • 110mm uPVC
    • Ring Seal Joints
    • Suitable for Gravity Drainage & Sewerage
    • Install to Depths of 10m
    • Suitable for Gravity Drainage & Sewerage

    £1.44 inc VAT
    (£1.20 ex VAT)

  • 110mm Coupler

    0 out of 5

    Couplings, or connectors as they are sometimes referred to, are used to join two pipes together. If the pipe has been cut to length it should be chamfered and lubricated prior to insertion into the connector to ensure the best possible seal.

     This connector has a centre stop, which means that it cannot be slid along a pipe – it is used predominantly when laying new drains. If you are repairing or replacing a section of broken pipe, it is easier to use a slip coupling which does not have the centre stop. This enables the slip coupling to be inserted completely onto one of the lengths of pipe and then moved back into position to make the join when the new section of pipe is lowered into position.

    £1.66 inc VAT
    (£1.38 ex VAT)

  • 110mm Slip Coupler

    0 out of 5

    SN8 double socket slip coupler for repairing existing 110mm sewer/drainage pipe without centre stop.

    Outside Diameter: 110mm
    Standards: EN1401-1
    Material: PVC-U

    £1.66 inc VAT
    (£1.38 ex VAT)

  • 110mm S/S Short Radius Bend 15 degree

    0 out of 5

    15° SN8 single socket short radius bend for connecting 110mm sewer drainage pipe.

    Internal Diameter: 15°
    Standards: EN1401-1
    Material: PVC-U

    £2.35 inc VAT
    (£1.96 ex VAT)

  • 110mm S/S Short Radius Bend 30 degree

    0 out of 5

    30° SN8 single socket short radius bend for connecting 110mm sewer drainage pipe.

    Internal Diameter: 30°
    Standards: EN1401-1
    Material: PVC-U

    £2.35 inc VAT
    (£1.96 ex VAT)

  • 110mm S/S Short Radius Bend 45 degree

    0 out of 5

    45° SN8 single socket short radius bend for connecting 110mm sewer drainage pipe.

    Internal Diameter: 45°
    Standards: EN1401-1
    Material: PVC-U

    £2.35 inc VAT
    (£1.96 ex VAT)

  • 110mm D/S Short Radius Bend 15 degree

    0 out of 5

    All underground drain systems feature a combined lip and compression seal which is secure against dislodgement and makes jointing easier.

    All systems are manufactured in the UK to stringent quality standards providing the installer with a completely reliable product range that will continue to perform.

    £2.54 inc VAT
    (£2.12 ex VAT)

  • 110mm D/S Short Radius Bend 30 degree

    0 out of 5

    All underground drain systems feature a combined lip and compression seal which is secure against dislodgement and makes jointing easier.

    All systems are manufactured in the UK to stringent quality standards providing the installer with a completely reliable product range that will continue to perform.

    £2.54 inc VAT
    (£2.12 ex VAT)

  • 110mm D/S Short Radius Bend 45 degree

    0 out of 5

    All underground drain systems feature a combined lip and compression seal which is secure against dislodgement and makes jointing easier.

    All systems are manufactured in the UK to stringent quality standards providing the installer with a completely reliable product range that will continue to perform.

    £2.54 inc VAT
    (£2.12 ex VAT)

  • 110mm D/S Equal Junction 45 degree Y

    0 out of 5

    Double socket allows connection of two underground drainage systems into one. Strong, durable PVC-U. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals will facilitate jointing.

    £4.14 inc VAT
    (£3.45 ex VAT)

  • 110mm D/S Equal Junction 87.5 degree T

    0 out of 5

    Size : 110mm
    Material: PVCu
    Spec: BS EN 1401-1

    £4.14 inc VAT
    (£3.45 ex VAT)

  • Bottle Gully Square Top Adaptor 110mm

    0 out of 5

    £4.20 inc VAT
    (£3.50 ex VAT)

  • 110mm S/S 90 degree Bend

    0 out of 5

    Single Socket Knuckle Bends are part of our gravity drainage system designed for sewer, foul and surface water application.Suitable for all domestic commercial and industrial applications.

    Diameter: 110mm (4″),

    Single Socket Ring Sealed Bend,

    Angle: 90 Degree,

    Material: Manufactured From Robust Pvc,

    £4.60 inc VAT
    (£3.83 ex VAT)

  • 110mm T/S Equal Junction 45 degree Y

    0 out of 5

    Triple socket allows connection of two underground drainage systems into one. Strong, durable PVCu. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals will facilitate jointing.

    • Suitable for High Temperature Waste Discharges
    • 110mm PVCu
    • Ring Seal Joints
    • Suitable for Gravity Drainage & Sewerage
    • Install to Depths of 10m

    £4.92 inc VAT
    (£4.10 ex VAT)

  • 110mm T/S Equal Junction 87.5 degree T

    0 out of 5

    Triple socket allows connection of two underground drainage systems into one. Strong, durable PVCu. Lightweight and easy to work with. Push-fit joint through an innovatively designed seal and snap-cap system. The use of silicone lubricant on all seals will facilitate jointing.

    • Suitable for High-Temperature Waste Discharges
    • 110mm PVCu
    • Ring Seal Joints
    • Suitable for Gravity Drainage & Sewerage
    • Install to Depths of 10m

    £4.92 inc VAT
    (£4.10 ex VAT)

  • 110mm Screwed Access Cap

    0 out of 5

    For use at the end of a pipe run or at a branch to create an access point.

    • 110mm PVCu
    • Ring Seal Joints
    • Suitable for Gravity Drainage & Sewerage
    • Install to Depths of 10m

    £5.58 inc VAT
    (£4.65 ex VAT)

  • 110mm Oval Rodding Eye – Plastic

    0 out of 5

    Product Depth 145 mm
    Product Diameter 110 mm
    Product Height 185 mm
    Product Type Rodding Point (Spigot)
    Product Width 127 mm
    Shape Oval

    £7.80 inc VAT
    (£6.50 ex VAT)

  • 110mm Round Back Inlet Bottle Gully

    0 out of 5

    PVC underground round top back inlet bottle gully with 110mm spigot outlet. Complete with integral trap that can be easily removed for rodding. Back inlet is pre-drilled ready to accept 110mm drain pipe, silicone or adhesive will be required. Overall dimensions: 190mm diameter x 290mm high. Rising piece can be bought separately if you need if you need a greater depth than 290mm. Light duty, only suitable for pedestrian traffic.

    £8.10 inc VAT
    (£6.75 ex VAT)

  • 110mm Round Plain Bottle Gully

    0 out of 5

    Round bottle gully for waste pipe connections and collecting surface with 110mm single outlet.

    £8.10 inc VAT
    (£6.75 ex VAT)

  • 110mm Rest Bend 90 degree

    0 out of 5

    110mm PVC underground 90 degree long radius drainage rest bend. Double socket with integral rubber seals allows insertion of plain ended pipe or fitting. Used at the bottom of soil stack to minimise the chance of blockages. Manufactured to EN-1401.

    £8.39 inc VAT
    (£6.99 ex VAT)

  • 110mm Rectangular Hoper Head

    0 out of 5

    Allows rainwater and waste pipes to be connected to drainage systems. Use in conjunction with P traps. Includes a polypropylene grid.

    • 110mm PVCu
    • Ring Seal Joints
    • Suitable for Gravity Drainage & Sewerage
    • Install to Depths of 10m
    • Suitable for Gravity Drainage & Sewerage

    £8.64 inc VAT
    (£7.20 ex VAT)

  • 110mm P-Trap

    0 out of 5

    Low back P trap for 110mm underground pipe system.

    110mm Underground Drainage Systems are designed for use in gravity drainage and sewerage applications, up to a depth of 10M, all our drainage pipes and the majority of fittings are manufactured from Polyvinyl Chloride (PVC-U). Inspection chambers, and gully grids are manufactured from polypropylene.

    £8.88 inc VAT
    (£7.40 ex VAT)

  • 110mm Square Rodding Eye – Plastic

    0 out of 5

    Product Depth 145 mm
    Product Diameter 110 mm
    Product Height 185 mm
    Product Type Rodding Point (Spigot)
    Product Width 127 mm
    Shape Oval

    £19.20 inc VAT
    (£16.00 ex VAT)

  • 110mm Sealed Aluminium Rodding Eye

    0 out of 5

    Product Depth 145 mm
    Product Diameter 110 mm
    Product Height 185 mm
    Product Type Rodding Point (Spigot)
    Product Width 127 mm
    Shape Oval

    £23.40 inc VAT
    (£19.50 ex VAT)

  • Buffalo 110mm Non-return Valve with SS Rodent Guard

    0 out of 5
    • Stops backflow of effluent into properties, businesses and homes during flooding. Used extensively in properties on flood plains.
    • Stops rodents, frogs, snakes and other vermin from entering homes, businesses and other properties.

    • Fits both Clay and Plastic pipes.

    • WRc Tested and Certified

    • 5 Year Guarantee

    £64.80 inc VAT
    (£54.00 ex VAT)

Call Now Button