23 July 2014
 

 

Ductile Iron and Steel Covers

We have access to the UK’s largest stock of Ductile Iron and Steel Covers, Gratings and Manhole covers.

Our covers come in all standard sizes, made from ductile iron and galvanised steel, for Light duty pedestrian loading to ultra heavy duty motorway specification

Ductile iron products are BSI Kite marked to BS-EN124:1994 and, where applicable also meet the recommendations of BS 7903 and The Highways Agency advice note HA104/02. Steel products are manufactured to FACTA (Fabricated Access Cover Trade Association) specifications.

We can also make bespoke covers to suit your application, please enquire for more information by calling us or using the form below.

We supply polymer concrete channel drain with ductile iron or galvanized grates. This is complemented by our range of HDPE channel drainage systems which cover all application types from domestic usage through to industrial, agricultural, transport yard and many more.

Steel Covers

 

STANDARD PRESSED STEEL MANHOLE COVERS AND FRAMES

  • Pressed pattern lid
  • 25mm (50 series) or 40mm (70 series) deep frames produced
  • Lids underbraced, where required, to meet required load rating.
  • Manufactured to standard sizes only to enable economic design
  • Standard products produced are single seal non-lock and double seal locking.
  • Galvanised to BSEN ISO 1461 as standard
  • 50 series 600 x 450mm clear opening covers in all loadings are available with single seal polypropylene frame.

STANDARD CHEQUER PLATE TOP ACCESS COVERS & FRAMES

  • Chequer plate solid top lids Underbraced where required to meet stated load ratings
  • Supplied single seal as standard
  • Available as double seal.
  • 400 series twin units have a centre removable beam and frame fixing points
  • For Kitemarked version see KS10 series in kitemarked steel products.
  • Manufactured under an ISO 9001:2000 Quality System
  • Finish: Hot dipped galvanised to BS EN ISO 1461 as standard.

HINGED AND LOCKING CHEQUER PLATE TOP ACCESS COVERS& FRAMES

  • Chequer plate solid top lids
  • Underbraced where required to meet stated load ratings
  • Hinged lids complete with ‘Lock & Lift’ locking device.
  • Available as double seal
  • Supplied single seal as standard.
  • Twin units have a removable centre beam
  • Manufactured under an ISO 9001:2000 Quality System
  • For Kitemarked version see KS20 series in kitemarked steel products
  • Finish: Hot dipped galvanised to BS EN ISO 1461 as standard.

WATERTIGHT/ PRESSURE TIGHT CHEQUER PLATE TOP ACCES COVERS & FRAMES

  • Chequer plate solid top lids.
  • Underbraced where required to meet stated load ratings
  • Cover locked onto frame with stainless steel countersunk allen key head screws.
  • Lid/frame interface fitted with a semi-cured neoprene seal.
  • Frame fitted with fishtails for casting into concrete floor.
  • Manufactured under an ISO 9001:2000 Quality System

DUCT COVERS AND FRAMES

  • Chequer plate solid top lids Underbraced where required to meet stated load ratings.
  • Supplied un-sealed as standard Available single or double seal
  • Units are manufactured to suit any layout which may include 90 degree turns T-Junctions, intersections, non-standard angle turns, etc.
  • Finish: Hot dipped galvanised to BS EN ISO 1461 as standard
  • Manufactured under an ISO 9001:2000 Quality System

DEEP FRAME GARAGE FORECOURT ACCESS COVERS AND FRAMES

  • Chequer plate solid top lids
  • Underbraced where required to meet stated load ratings
  • Supplied single seal as standard.
  • Available as double seal
  • Deep frame/shallow lid design enabling strength of construction whilst retaining a relatively light lid when compared to other deep frame access covers.
  • Developed especially for Petrol Forecourts
  • Manufactured under an ISO 9001:2000 Quality System
  • Finish: Hot dipped galvanised to BS EN ISO 1461 as standard.

MULTIPLE LEAF DROP IN ACCESS COVERS AND FRAMES

  • Chequer plate solid top lids
  • Underbraced where required to meet stated load ratings
  • Supplied single seal as standard
  • Available as double seal
  • Supplied with necessary support beams and site fitted support pockets
  • 43mm deep frame up to 2000 x 2000mm clear openings & 75mm thereafter
  • Manufactured under an ISO 9001:2000 Quality System
  • Finish: Hot dipped galvanised to BS EN ISO 1461 as standard.

MULTIPLE HINGED ACCESS COVERS AND FRAMES

  • Chequer plate solid top lids
  • Underbraced where required to meet stated load ratings
  • Hinged lids complete with self locating staybar and ‘Lock & Lift’ devices as standard
  • Supplied single seal as standard
  • Available as double seal
  • Supplied with necessary support beams and site fitted support pockets
  • 43mm deep frame up to 2000 x 2000mm clear openings & 75mm thereafter
  • Manufactured under an ISO 9001:2000 Quality System
  • Finish: Hot dipped galvanised to BS EN ISO 1461 as standard.

FORKLIFT LOADING ACCESS COVERS AND FRAMES

  • Chequer plate solid top lids
  • Heavily underbraced
  • Frame fixing points fitted as standard
  • Supplied single seal as standard
  • Available as double seal
  • Twin units have a centre removable beam
  • Twin units have a centre removable beam
  • For Kitemarked version see KS10 series in kitemarked steel products
  • Finish: Hot dipped galvanised to BS EN ISO 1461 as standard.

Ductile Iron Covers

 

Ultra Heavy Duty Manhole Cover & Frame

  • Manufactured to BS EN124 Class F900
  • Highways agency , HA104/02 compliant
  • 90 Tonne Safe Test Load
  • Kitemarked for third party assurance of quality
  • BS 7903 :1997 compliant
  • Works safety tested to +10% above EN 124 = 99Tonnes
  • Anti movement technology for improved bonding to bedding material
  • Non rock three point suspension for stability & silent operation
  • Ductile iron for improved weight to strength ratio
  • Black coated finish

Ultra Heavy Duty Manhole Cover & Frame

  • Manufactured to BS EN124 Class E600
  • Highways agency , HA104/02 compliant
  • 60 Tonne Safe Test Load
  • Kitemarked for third party assurance of quality
  • BS 7903 :1997 compliant
  • Works safety tested to +10% above EN 124 = 66 Tonnes
  • Anti movement technology for improved bonding to bedding material
  • Non rock three point suspension for stability & silent operation
  • Ductile iron for improved weight to strength ratio
  • Black coated finish

D400 Heavy Duty Manhole Cover 150mm Deep

  • Manufactured to BS EN124 Class D400
  • Kitemarked for third party assurance of quality
  • Highways agency, HA104/02 compliant
  • BS 7903:1997 compliant
  • 40 Tonne safe test load
  • Anti-movement technology for improved bonding to bedding material
  • Non rock three point suspension for added stability & silent operation
  • Ductile iron for improved weight to strength ratio
  • Black coated finish

D400 Heavy Duty Manhole Cover 100mm Deep

  • Manufactured to BS EN124 Class D400
  • Kitemarked for third party assurance of quality
  • Highways agency, HA104/02 compliant
  • BS 7903:1997 compliant
  • 40 Tonne safe test load
  • Anti-movement technology for improved bonding to bedding material
  • Non rock three point suspension for added stability & silent operation
  • Ductile iron for improved weight to strength ratio
  • Black coated finish

C250 Heavy Duty Cover

  • Manufactured to BS EN124 Class C250
  • Kitemarked for third party assurance of quality
  • Full single seal gives airtight seal when packed with grease
  • Suitable for slow moving heavy traffic
  • Ductile iron for improved weight to strength ratio
  • Black coated finish

B125 Medium Duty Cover

  • Manufactured to BS EN124 class B125
  • Kitemarked for third party assurance of quality
  • Single seal versions give airtight seal when packed with grease
  • Slide out units are un-sealed and allow easy removal
  • Ductile iron for improved weight to strength ratio
  • Black coated finish

A15 Light Duty Cover

  • Manufactured to BS EN124 Class A15
  • Single seal versions gives airtight seal when packed with grease.
  • Double sealed versions available for additional sealing
  • Suitable for areas only accessible by pedestrians & pedal cyclists
  • 1.5 Tonne safe test load
  • Black coated finish

Have a Question? Need More Information?

If you would like to learn more about Ductile Iron and Steel Covers, have a question you'd like to ask us or wish us to call you back by phone, please Click Here to complete our information request form.

*Please note any details you provide will be kept confidential and not passed on to any third party.